S S Traders

Smartcare MicroconcreteFeatures & Benefits Chemical & Physical ParametersAsian Paints Smartcare Microconcrete is a Dual Shrinkage Compensated, Flowable Micro-concrete. It is UsedFor the Repair and Restoration of Damaged Rcc Structures Like Beams, Columns, Slabs Etc.• Shrinkage Compensation: Dual Shrinkage Compensated & Hence Crack Resistant• Flow: Self Compacting Flowable Concrete Which Can Be Poured/pumped Strength: Develops High Initial and Ultimate Compressive Strength• Moisture Resistant: Resistant to Moisture Ingress• Durable: Provides a Durable and Strong Structural Repair• Easy to Use: Single Component Ready to Use Powder Which Only Requires Addition of Water• Appearance: Free Flowing Grainy Grey Powder• Pack Size: 25 Kg• Storage Conditions/shelf-life: Shelf Life is 6 Months From the Date of Manufacturing. Store at Cool and Dry Place in Unopened Condition• Yield: 12.2 Litres at W/p Ratio of 0.14 for 25 Kg Bag

Advantages

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state. 
• Can be pumped or poured into restricted locations. 
• Highly fl uid to allow for placement without vibration. 
• Pre-packed to overcome site-batched variations. 
• Rapid strength gain to facilitate early reinstatement. 
• High ultimate strengths and low permeability of cured repair. 
• Contains no chloride admixture.
• Ensures piletop integrity as part of a waterproofi ng system

Description
Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modifi ed by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.

Technical Support Fosroc off ers a technical support package to specifi ers, end users and contractors as well as technical on-site assistance in locations all over the country. 

Design criteria Renderoc RG can be applied in sections upto 100mm deep. For larger sections, the addition of approved aggregates may be required. This will depend on the specifi c confi guration of the repair location. Fosroc offi ce shall be contacted for further information. 

Properties The following results were obtained at a water:Powder ratio of 0.16 @ 300C.

• Vertical and overhead repairs to restore ‘covercrete’. 
• General concrete and masonry repairs.
• Voids greater than 10 mm deep.
• Repairs to honeycombing. 
• Larger scale repairs where formwork cannot be erected

Advantages Renderoc
HSXtra features Dimensional Stability Technology - a new materials technology which controls the rate of drying shrinkage such that, when used correctly: i. The dimensions of the repair remain stable; and thus ii. Eliminating failure, due to shrinkage cracking. This in turn leads to a series of associated benefits: Cost effective - shrinkage control enables repairs to be completed ‘right first time’.

• Enhanced durability – works in tandem with extremely low permeability to prolong effective working life.
• Compatibility – aligns performance closer than ever before, to that of host concrete. 
• User friendly – specifically developed to provide an easy-to-apply product, suitable for local conditions. 
• Definable performance – positive benefits are easily demonstrated via a single, simple measurement.

Description
Renderoc HSXtra is a high specification cementitious repair mortar that is reinforced with special fibers for enhanced physical properties. It is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.